Snow impact on groundwater recharge in Table Mountain Group aquifer systems with a case study of the Kommissiekraal River catchment South Africa

Snowmelt in the mountainous areas of the Table Mountain Group (TMG) in South Africa is believed to be one of sources of groundwater recharge in some winter seasons. This paper provides a scientific assessment of snow impact on groundwater recharge in Table Mountain Group Aquifer Systems for the first time. Snowfall periodically occurs on the highest mountain ranges of about 1 000 to 1 200 m above mean sea level (a.m.s.l) in the TMG area. Snow over the mountainous catchments is often observed on the gentle side of the slope, which is substantially affected by wind and vegetation. Based on climatic analysis, recharge processes and Landsat 7 Enhanced Thematic Mapper (ETM) images, the recharge areas influenced by snowmelt in the TMG are identified as those catchments that are located above 1 000 m a.m.s.l. Physical processes within the snowpack are very complex involving mass and energy balances as well as heat and mass transport. Snowmelt rate was calculated using a variable degree-day melt factor determined as a function of snowpack density and vegetation cover. The hourly snowmelt rates estimated with different new snow density models. Groundwater recharge from snowmelt is affected by snowmelt mechanisms and local recharge conditions. The recharge rate is constrained by characteristics of the fractures rather than snowmelt rate. Recharge is also discounted due to prevailing interflow occurring in favourite geomorphological locations. This hypothesis is confirmed by an infiltration experiment in which up to 13.6% of the infiltrating water can recharge the aquifer.Web of Scienc

A Lyapunov approach for the exponential stability of a damped Timoshenko beam

In this technical note, we consider the stability properties of a viscously damped Timoshenko beam equation with spatially varying parameters. With the help of the port-Hamiltonian framework, we first prove the existence of solutions and show, by an appropriate Lyapunov function, that the system is exponentially stable and has an explicit decay rate. The explicit exponential bound is computed for an illustrative example of which we provide some numerical simulations

Linear Matrix Inequality Design of Exponentially Stabilizing Observer-Based State Feedback Port-Hamiltonian Controllers

The design of an observer-based state feedback (OBSF) controller with guaranteed passivity properties for port-Hamiltonian systems (PHS) is addressed using linear matrix inequalities (LMIs). The observer gain is freely chosen and the LMIs conditions such that the state feedback is equivalent to control by interconnection with an input strictly passive (ISP) and/or an output strictly passive (OSP) and zero state detectable (ZSD) port-Hamiltonian controller are established. It is shown that the proposed controller exponentially stabilizes a class of infinite-dimensional PHS and asymptotically stabilizes a class of finite-dimensional non-linear PHS. A Timoshenko beam model and a microelectromechanical system are used to illustrate the proposed approach

AN IMPROVED BARE-BONES PARTICLE SWARM ALGORITHM FOR MULTI-OBJECTIVE OPTIMIZATION WITH APPLICATION TO THE ENGINEERING STRUCTURES

In this paper, an improved bare-bones multi-objective particle swarm algorithm is proposed to solve the multi-objective size optimization problems with non-linearity and constraints in structural design and optimization. Firstly, the development of particle individual guide and the randomness of gravity factor are increased by modifying the updated form of particle position. Then, the combination of spatial grid density and congestion distance ranking is used to maintain the external archive, which is divided into two parts: feasible solution set and infeasible solution set. Next, the global best positions are determined by increasing the probability allocation strategy which varies with time. The algorithmic complexity is given and the performance of solution ability, convergence and constraint processing are analyzed through standard test functions and compared with other algorithms. Next, as a case study, a support frame of triangle track wheel is optimized by the BB-MOPSO and improved BB-MOPSO. The results show that the improved algorithm improves the cross-region exploration, optimal solution distribution and convergence of the bare-bones particle swarm optimization algorithm, which can effectively solve the multi-objective size optimization problem with non-linearity and constraints

Magnetosome Gene Duplication as an Important Driver in the Evolution of Magnetotaxis in the Alphaproteobacteria

The evolution of microbial magnetoreception (or magnetotaxis) is of great interest in the fields of microbiology, evolutionary biology, biophysics, geomicrobiology, and geochemistry. Current genomic data from magnetotactic bacteria (MTB), the only prokaryotes known to be capable of sensing the Earth’s geomagnetic field, suggests an ancient origin of magnetotaxis in the domain Bacteria. Vertical inheritance, followed by multiple independent magnetosome gene cluster loss, is considered to be one of the major forces that drove the evolution of magnetotaxis at or above the class or phylum level, although the evolutionary trajectories at lower taxonomic ranks (e.g., within the class level) remain largely unstudied. Here we report the isolation, cultivation, and sequencing of a novel magnetotactic spirillum belonging to the genus Terasakiella (Terasakiella sp. strain SH-1) within the class Alphaproteobacteria. The complete genome sequence of Terasakiella sp. strain SH-1 revealed an unexpected duplication event of magnetosome genes within the mamAB operon, a group of genes essential for magnetosome biomineralization and magnetotaxis. Intriguingly, further comparative genomic analysis suggests that the duplication of mamAB genes is a common feature in the genomes of alphaproteobacterial MTB. Taken together, with the additional finding that gene duplication appears to have also occurred in some magnetotactic members of the Deltaproteobacteria, our results indicate that gene duplication plays an important role in the evolution of magnetotaxis in the Alphaproteobacteria and perhaps the domain Bacteria

Investigation of Application of Suction Line Heat Exchanger in R290 Air Conditioner with Small Diameter Copper Tube

R290 is a potential refrigerant replacing R22 because of its zero Ozone Depletion Potential (ODP) and virtually zero Global Warming Potential (GWP). However, R290 is flammable and requires excellent containment to avoid leakage and reduce the risk of fire. The use of small diameter copper tube (5 mm or even smaller) is an effective way to reduce refrigerant charge and thus reduce the risk of fire in the event of a refrigerant leak. However, employing small diameter copper tube will increase pressure drop and consequently reduce system performance. A suction line heat exchanger which employs the low temperature refrigerant in suction line to cool down the refrigerant before expansion value is a potential solution to improve system performance because R290 has low discharge temperature compared with HFC refrigerants (e.g. R22, R410A). This paper presents an investigation of application of a suction line heat exchanger in an R290 air conditioner with small diameter copper tube. A theoretical analysis is proposed at first to investigate the effect of the suction line heat exchanger on capacity and system energy efficiency under variable evaporating and cooling temperatures. A prototype R290 air conditioner with and without a suction line heat exchanger is tested in order to explore the effect of a suction line heat exchanger on system performance and refrigerant charge in real working conditions. Finally, a refrigerant circuit solution for heat pump air conditioners is proposed. The results of theoretical analysis indicate that the capacity and system energy efficiency increase linearly with the heat exchange of the suctionline heat exchanger, and the suction line heat exchanger can improves capacity by up to 12% and system energy efficiency by up to 4% under both cooling and heating modes. This is because the suction line heat exchanger increases the sub-cooling but has less impact on compressor power due to good thermal properties of R290. Further, the evaporating and condensation temperature have insignificant impact on the performance of suction line heat exchanger. The experimental results show that the suction line heat exchanger improves the cooling capacity and system efficiency by 5.3% and 4.5%, respectively. These results agree well with that of the system analysis. The sub-cooling temperature increases 10.2o C and the discharge temperature increases 25.4o C. Further, the suction line heat exchanger reduces the refrigerant charge by as much as 6%. This is because suction line heat exchanger increases the discharge temperature, and thus the superheat region of the condenser increases resulting in less refrigerant in the condenser. Overall, the use of a suction line heat exchanger in a system with small diameter copper tube improves the performance of R290 and more importantly reduces the refrigerant charge

Numerical Study on the Influence of Different Waving Bottom Form on the Fluid Surface Wave

Abstract: In the present study, the effect of waving bottom on the surface wave is studied. Basing on the fundamental equations of potential flow theory and boundary conditions, using the multiple scales perturbation method to derive the first-order and the second-order approximate equation which the fluid surface waves satisfied in the presence of waving bottom. Under the second-order approximation, the fluid surface waveform in first-order approximate equation is numerically simulated with MATLAB in the presence of different waving bottom form. The results show that: the fluid surface waveform is composed of a harmonic wave which has the same frequency with waving bottom and a pair of KdV solitary waves that spread to both the right and the left side when the waving bottom wave is a harmonic wave; and when the waving bottom is a solitary wave packet, it consists of a solitary wave which is closely related to the specific form of waving bottom and a couple of KdV solitary waves. With the development of time, three waves in fluid surface do not affect each other and they propagate independently. Thus it can be seen the waving bottom is effective for maintaining surface wave energy balance income and expenditure in the spreading process